Dip-Product&Lead-Free Brass Casting Graphite Releasing Agent Graphite Molds For Copper
Graphite Mould Releasing Agent
Our standard mould releasing agent is named I75L.
It is a powder made on the basis of graphite and other carbon and mineral materials.
| Specification | Graphite I75L is a powder made on the basis of graphite and other carbon and mineral materials. |
| Application | Graphite I75L is used as an immerse product (dip-product) applied with the foundry of brass after the techniques of manual, mechanical and low pressure. Suitable for heated metal molds. |
| Treatment | ◆ Graphite I75L is mixed in distilled water or deionization water in the proportion of 1:10 and is at once ready for use.
◆ The proportion can be changed according to the weight and thickness of the sides. |
I75L
It is used as an immerse product (dip-product) applied with the foundry of brass after the techniques of manual, mechanical and low pressure. It is also suitable for lead-free brass casting.
Benefit
Using I75L: longer durability of the die, uniform surface of the castings, less subsequent after work of the casting.
Excellent Lubricating and Parting Properties
Due to its layered structure, graphite exhibits excellent lubricating and parting properties which are maintained even under pressure or at high temperatures.
The single flakes are very thin and can easily position themselves between two surfaces in reciprocal motion generating a situation of three-body wear (surface-graphite-surface) with very low coefficients of friction.
This makes graphite a proven, environmentally friendly and indispensable component, for example in parting agents for metal processing or the production of high-performance lubricating grease.
Graphite is most effective for lubricants in stamping, rolling, metal, forging and general industry for processing of hot metal under pressure.
Graphite lubricant provides a lubricating layer of the following properties: resistance, minimal deposition, no biological fermentation, adhesion to the surface moisture resistance, thermal stability.
Main Effect of the Use of Graphite in Casting Steel Grades
The main effect of the use of graphite in casting steel grades (including the manufacture of seamless pipes and metal forging, stamping and rolling product):
- Reduced energy costs
- Reduction of emissions and the use of pure natural raw materials
- Savings in production costs
- Reduction of tool wear
- Improved workpiece surfaces
- Increase in productivity
- Reducing the number of defects
Product Tags:
|
|
Dip Product Lead Free Brass Casting Releasing Agent Graphite Molds For Copper Images
|
